Component |
Feature |
Advantage to you |
|
Storage tank |
Ribbed purpose made polyethylene tank, (high percentage of recycled material) |
In most installations, this tank can be installed without the need for expensive and unenvironmentally concrete. This typically saves in the region of £400 |
|
Dome & Lid |
Access chamber (polyethylene), with manhole cover |
This replaces the need to purchase separate manhole cover and build brick access chambers. This not only saves a huge amount of time, but it also significantly reduces the over all installation costs. |
|
Integrated filter
(pre-fitted)
|
Leaf & grit filter to 1000 microns |
With a single manhole, this system eliminates the need for calculated invert levels and removes unnecessary unsightly manhole lids. By blocking the majority of the access to the tank, this increases safety. Very simple maintenance, with no consumable parts. |
|
Calmed inlet
(pre-fitted)
|
Smooth entry of filtered water |
Increases oxygen transfer to the stored water body and allows the water to enter towards the bottom of the tank, which helps circulate the tank. This allows high quality water to be stored for long periods. |
|
Freerain pump |
Automatic jet pump (on board controls), c/w dry run protection. 3.6 bar of pressure |
Eliminates the need to have control panels in the house or garage. Therefore, the water can pump closer to the point of use. The automatic feature of the pump means that it is always ready as soon as you open the tap or pull the trigger. Dry run protection, means the pump will stop if there is insufficient water. |
|
Fine filtration |
Inline filter, attached to the pump |
Ensures that the water is of the highest standard and the pump is completely protected |
|
Suction hose |
Suction hose, c/w floating intake and filter. |
With easy standard connections, this ensures the pump is completely protected. |
General system operation and considerations |
|
In terms of the groundworks, you should aim to bring as many downpipes together as possible (up to 250M2 of roof) and then connect it into the side of the storage tank (4" push fit). An overflow must be provided and this could either be a soakaway or a stormdrain (or similar). |
 |
|
Click on image to enlarge and view all tank sizes |
Click on image to enlarge |
|
Three sizes of tanks are available and larger systems can be made by linking two or more tanks together at low level:
1,000 L
3,500 L
4,700 L
6,500 L
9,400L (2 tanks)
13,000L (2 tanks)
|
For more information and general chat about your requirements, please feel free to call our sales team on 01636 894906.
Please also be aware, that we also offer a slightly higher specification system call the Rain King Pro (see link top left) |
